TruLam Slot Punch w/Side Guide & Depth Margin
- New and improved model with side guide and depth margin
- Punches up to 25 mil for hard plastics (i.e. polyester or PVC)
- Maximum capacity of 0.8 mm for hard plastics and 1.2 mm for soft plastics
- Slot measures 1/8" x 5/8"
- The "reach" is adjustable from 3/16" to 3/8". This is the distance from the edge of the document to the slot punch.
- Punches up to 16 sheets of 20 lb. bond paper
ID supplies and attachments sold separately.
Lamination Depot is committed to providing shoppers around the world with the best in laminating and binding supplies and equipment at the guaranteed lowest prices. Our knowledgeable staff is always happy to answer any questions that you may have, provide recommendations about products, or share helpful tips to help your perfect your binding and laminating processes. Want to learn more about what sets Lamination Depot apart from the competition? Click any of the links below.
Ratings & Reviews
by Bobbie's Printing -
This is a great machine to punch the hole for the lanyard type of work...the machine is easy to use and the guide make it more easy to assure that you have the hole in the center of the item being punched...Great Machine...love it
The punch works exactly as expected. The price was great.
by Business shopper -
The punch has been reliable. It is a reasonable price and does exactly what we expected. It was a budget-friendly option to punch our badges.
by A.R. -
works as intended :)
Used with Prayer Card Pouches for Name Badges
by Julietteo -
We purchased this slot punch along with the prayer card pouches to make name badges for our 50th year high school reunion. It was perfect. The price was right! And it was more economical that trying to find pouches with slot already punched. It was better constructed than I thought it would be - for the price, I expected it might be flimsy...but it was not at all. Easy to set the depth of the slot and easy to use rather than a hand held punch.
by PACKING A PUNCH -
MY DAUGHTERS MAKES LETTER CARDS AND THE PUNCH HELPS WITH DISPLAY.
Sturdy and customizable
by SReynolds -
We are using this to punch slots in our ID badges and it works great. You can customize both the vertical and horizontal position, and it seems to be quite sturdy.
by Church lady -
Why pay to have slots punched when you can do it yourself? It's the best of both worlds, and much cleaner-looking than using a regular round hole punch which we had previously tried.
Unusable numbers on side guide
by jer -
I would consider this product excellent except for one extremely frustrating aspect and that is the side guide. The side guide is needed to be able to accurately center the punches. I use laminating pouches that are measured in inches and eighths of an inch. Thus, I need a guide that is measured likewise. But this punch uses some other system that I have yet to figure out. The numbers on it (7, 10, 15, and 20)are useless. The distance from the numbers 10-15 and 15-20 is one inch with the distance between the numbers being marked off in tenths. After doing some measuring and calculating of my own, I was able to roughly determine where the guide should be set; although it was never precise since I needed measurements in eighths instead of tenths. On the plus side, the guide doesn't move easily once it's set. The numbering system on the side guide is my only complaint, although I consider that a serious fault. The ability to set the depth margin can be useful although I found the default setting to my liking. I found the punch to be well constructed and I would recommend it to people who only punch items of the same size or to people who aren't concerned too much about centering the punch. I would not recommend it to people who punch items of various sizes and who therefore have a need to constantly reset the side quide.
Picked Just for You
We think you might find these recommended products useful for your next project: