Ledco Signmaster 44 in. Roll Laminator

Designed for Sign and Graphics Applications, Signmaster laminators are used in many settings including sign shops, photo-finishing labs, reprographics shops, and manufacturing plants. Using a Signmaster is much easier than doing the same work by hand. Fast and versatile, it takes little instruction to be up and running. The Signmaster is forgiving and will apply most materials under a wide range of speed and tension settings. Minimize waste and labor. In today's competitive world, the cost of re-work (recutting, re-weeding, or re-application) can take all of the profit out of the job. Whether it is transfer tape, vinyl, acid-resistant tape, pre-mask, adhesive film, or other pressure-sensitive materials, a Signmaster will put it down effortlessly with no bubbles or wrinkling, minimizing any waste of materials and labor. The Signmaster is a heavy-duty, commercial laminator designed for the most rigorous and demanding jobs and workloads. It is designed to provide quality lamination with a wide variety of papers, vinyls and other materials up to 1/2" thick using film up to 10 mils thick.

Product Summary:

• A release liner take-up with an adjustable clutch, takes up the release liner found on most pressure-sensitive films.
• Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
• A variable speed motor control allows operators to apply different materials to different substrates. A preset 3-function switch allows operation in variable speed mode, a preset film speed mode and a preset pouch speed mode.
• The feed tray is non-ferrous , so magnetic materials may be applied.
• The supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
• A reverse drive switch makes it simple to back material out of the laminating rollers or correct material wrap-around.
• A foot pedal is a standard feature that frees hands to align and feed work.
• A stand is included with the machine.
• A safety shield with electronic interlock prevents operation of the machine if the guard and the feed tray are not in place, protecting operators and other employees.
• Two safety stop buttons on both sides of the machine will automatically stop the machine when the operator pushes them in.
• Correct and even lamination pressure is ensured by rubber rolls that are spring-loaded and preset. The pressure is easy to adjust if required when performing routine maintenance.
• Manufactured in the USA means quality, better service and faster parts availability.
• Ledco's tradition of 30 plus years of service to industry.

Specifications:

**Click Here for Complete Selection of Roll Film**